General Information | Address Book | Messages
My Tasks | Project Dashboard | Instruction Videos
For any questions, please email our Customer Support Team at support@webuildcs.com.
Transmittals Manager - How are Transmittals created?
Transmittals are created or sent automatically in four different scenarios as detailed below:
Send transmittals when sharing selected plans/files (automatically sent)
To share selected plans or files from a folder, send a transmittal and view the related transmittal record, follow the steps below.
Note: sharing individual files with contacts will not give them access to your entire document folder, only to the files that you shared.
Go to your project documents and click on a folder.
Hover over a file and click on the checkbox to the left-hand side of the document code to reveal the bottom toolbar.
Tip: You can select all files in your folder by clicking on the checkbox on the left-hand side of the bottom-toolbar.
Click on the “SHARE” button on the bottom toolbar to share your selected files.
Add one or more contacts you would like to share your selected files with by typing into the search field and selecting them from the list.
You can then add a note and click the “SHARE” button to finish sharing.
After you share one or more plans/files, each contact receives an email notification like the one in the example below.
Recipients can click the “DOWNLOAD DOCUMENTS” button to download all related files and folders, or click “View Transmittal Details” the transmittal information and related files via the interface.
A record of the related transmittal is added to the “Sent transmittals” folder of your Transmittals module with all information, including a date/time stamp for download activity.
Note: users without Webuild accounts will be able to access files online via a “guest mode” interface with limited access.
Example: Transmittal pdf file
Navigate to your Transmittals Manager to view the related sent transmittal record.
Click on the “Sent Transmittals” folder, then click on the related transmittal.
The most recently sent transmittals will appear at the top of the list, with the company name, transmittal number and date sent displayed.
A “viewed” date stamp is displayed which appears after recipients either download the transmittal files or view them online.
After clicking into the transmittal, you will see an “INFORMATION” and “TRANSMITTAL RECEITS” tab AND “TRANSMITTAL FILES” tab.
The “INFORMATION” tab displays the sender/recipients and other details.
“TRANSMITTAL RECEITS” tab displays the time and date stamp when the recipient downloaded the transmittal documents. You can download and save the receipt if you want by clicking the floating dots to the right of the receipt.
The “TRANSMITTAL FILES” tab displays all plans/files that relate to the transmittal. Each file can be viewed online by clicking them.
Send transmittals when sharing document folders (automatically sent)
After sharing selected document folders with your project team members or contacts from outside of your organisation, a transmittal email notification is automatically sent containing a transmittal pdf file and a button to download all related transmittal plans/files.
To share whole document folders, send a transmittal and view the related transmittal record, follow the steps below.
To learn how to share document folders, see the Document Management section of the User Guide.
Navigate to your transmittals manager to view the related sent transmittal record.
Click on the “Sent Transmittals” folder, then click on the related transmittal.
The most recently sent transmittals will appear at the top of the list, with the company name, transmittal number and date sent displayed.
A “viewed” date stamp is displayed which appears after recipients either download the transmittal files or view them online.
After clicking into the transmittal, you will see an “INFORMATION” and “TRANSMITTAL RECEITS” tab AND “TRANSMITTAL FILES” tab.
The “INFORMATION” tab displays the sender/recipients and other details.
“TRANSMITTAL RECEITS” tab displays the time and date stamp when the recipient downloaded the transmittal documents. You can download and save the receipt if you want by clicking the floating dots to the right of the receipt.
The “TRANSMITTAL FILES” tab displays all plans/files that relate to the transmittal. Each file can be viewed online by clicking them.
Send transmittals for document folder additions/new versions (automatically prepared)
After sharing a document folder with project team members and contacts from outside of your organisation, transmittals will be automatically prepared for them by the system when files are added or superseded in that folder. Transmittals that are automatically prepared appear in the “Pending Transmittals” folder of your project’s Transmittals Manager.
Example: Jim shares a document folder with Patricia, Steven and Phil, containing one file (A1.01 – Site and Roof Plan Version 1).
The next week, Jim receives a revised version of the file (A1.01 – Site and Roof Plan Version 2) and uploads and saves it to his document folder, superseding the old version. Now, Patricia, Steven and Phil need to receive the new version of the file.
Jim doesn’t have to send the new version of the file and create a transmittal for each contact manually. All Jim has to do is to review the transmittals already prepared automatically by the system and placed in the “Pending” folder of the project’s Transmittals Manager, then send all related files and transmittals at once.
To create and send all transmittals for document folder additions/new versions to all related contacts, follow the steps below.
Add the new document and click “Supersede File” on the drop down menu to the left of the file name.
A new dialogue will open with the files already uploaded. Select the file that you want to supersede and click the “Save” on the top right hand corner.
The new document will appear in a new page. You can add notes, add details or update status of the file, then click on the “Save” button at the bottom of the page.
Pending transmittals are then automatically created for contacts with shared access to your document folder as you add/supersede files.
Navigate to your transmittals manager to view the related pending transmittal record.
Click on the “Pending Transmittals” folder.
Here you will see a list of transmittals that have been automatically prepared, but not yet sent.
The most recently prepared will appear at the top of the list, with the company name, transmittal number and related module (i.e. Document Folders or bids).
You can review each pending transmittals information and files by clicking on each. To send all pending transmittals at once, click the “SEND ALL” button on the top right-hand side of your screen.
After being redirected back to all transmittals, you will see a small spinner on the “Sent Transmittals” folder. This means transmittals are currently being sent in the background.
Click on the “Sent Transmittals” folder, then click on the related transmittal.
The most recently sent transmittals will appear at the top of the list, with the company name, transmittal number and date sent displayed.
A “viewed” date stamp is displayed which appears after recipients either download the transmittal files or view them online.
After clicking into the transmittal, you will see an “INFORMATION” and “TRANSMITTAL RECEITS” tab AND “TRANSMITTAL FILES” tab.
The “INFORMATION” tab displays the sender/recipients and other details.
“TRANSMITTAL RECEITS” tab displays the time and date stamp when the recipient downloaded the transmittal documents. You can download and save the receipt if you want by clicking the floating dots to the right of the receipt.
The “TRANSMITTAL FILES” tab displays all plans/files that relate to the transmittal. Each file can be viewed online by clicking them.
Send transmittals to contractors for plan/file changes in bid/tender packages (automatically prepared)
There are two scenarios where “pending” transmittals are automatically created for contractors in your bid package:
Whenever either of the above happens, a transmittal will be created for all contractors invited to price a trade package.
Note: “Pending transmittals” are automatically created only for contractors that have downloaded their bid package and require updates.
Transmittals that are automatically prepared appear in the “Pending Transmittals” folder of your project’s Transmittals Manager.
Example: Ian invites A Corp and B Corp to his project’s Carpentry package. This big package contains one file (A1.01 – Site and Roof Plan Version 1). Each contractor’s related contact downloads the bid package accordingly.
The next week, Ian receives a revised version of the file (A1.01 – Site and Roof Plan Version 2) and uploads it to his document folder, superseding the old version.
Ian then goes into his Carpentry bid package and adds “A1.02” in the documents tab.
Now A Corp and B Corp need to receive the new version of A1.01 and the additional file (A1.02).
Instead of manually sending the file and creating transmittals for each contractor, Ian can view the automatically prepared transmittals from the “Pending” of the project’s Transmittals Manager, then click a button to send all related files and transmittals at once.
To send all transmittals for plan/file changes in bid packages to all related contacts, follow the steps below.
Add the new document and click “Supersede File” on the drop down menu to the left of the file name.
A new dialogue will open with the files already uploaded. Select the file that you want to supersede in the related bid/tender package and click the “Save” on the top right hand corner.
The new document will appear in a new page. You can add notes, add details or update status of the file, then click on the “Save” button at the bottom of the page.
Pending transmittals are then automatically created for contacts with shared access to your document folder as you add/supersede files.
Navigate to your transmittals manager to view the related pending transmittal record.
Click on the “Pending Transmittals” folder. Here you will see a list of transmittals that have been automatically prepared, but not yet sent.
The most recently prepared will appear at the top of the list, with the company name, transmittal number and related module (i.e. Document Folders or Bid Packages).
You can review each pending transmittals information and files by clicking on each. To send all pending transmittals at once, click the “SEND ALL” button on the top right-hand side of your screen.
After being redirected back to all transmittals, you will see a small spinner on the “Sent Transmittals” folder. This means transmittals are currently being sent in the background.
Click on the “Sent Transmittals” folder, then click on the related transmittal. The most recently sent transmittals will appear at the top of the list, with the company name, transmittal number and date sent displayed.
A “viewed” date stamp is displayed which appears after recipients either download the transmittal files or view them online.
After clicking into the transmittal, you will see an “INFORMATION” and “TRANSMITTAL RECEITS” tab AND “TRANSMITTAL FILES” tab.
The “INFORMATION” tab displays the sender/recipients and other details.
“TRANSMITTAL RECEITS” tab displays the time and date stamp when the recipient downloaded the transmittal documents. You can download and save the receipt if you want by clicking the floating dots to the right of the receipt.
The “TRANSMITTAL FILES” tab displays all plans/files that relate to the transmittal. Each file can be viewed online by clicking them.
See some examples of the transmittals interface below.
Example: Transmittal pdf file
Example: transmittal sent for plan/file changes in bid/tender packages.
Example: transmittal sent for plan/file changes in bid/tender packages – information tab.
Schedule your pending transmittals to send automatically
As pending transmittals accumulate after updates to document folders and bid/tender packages, project team members can opt to schedule a time of day for them to be automatically sent to all related contacts.
To schedule your project’s pending transmittal distribution, follow the steps below.
Navigate to your transmittals manager. For setting up the “AUTO SEND” function, see Step 3.
You can view the items in the “Pending Transmittals” folder. Here you will see a list of transmittals that have been automatically prepared, but not yet sent.
The most recently prepared will appear at the top of the list, with the company name, transmittal number and related module (i.e. Document Folders or Bids/Tenders Folders).
To select the “AUTO SEND” function, click on the “AUTO SEND” button on the top right hand side. A new dialogue will open to give you the option of selecting “Manual” transmittal or “Once Per Day” transmittal.
Click the “Manual” button to send transmittals manually, or the “Once Per Day” button.
If you select the “Once Per Day” option, then select the time picker below to set a time of day when transmittals are to be automatically sent to recipients.
After selecting a time, click the “SAVE” button.
Resend a transmittal
To re-send a transmittal, follow the steps below.
Navigate to your transmittals manager.
Click on the “Sent” or “Received” transmittals folder (depending on the location of the transmittal you wish to re-send).
Click the overflow button on the right-hand side of the related transmittal block, then select “Resend” from the menu.
Export a transmittal
To export a transmittal, follow the steps below.
Navigate to your transmittals manager.
Click on the “Pending”, “Sent” or “Received” transmittals folder (depending on the location of the transmittal you wish to export).
Click the overflow button on the right-hand side of the related transmittal block, then select “Export” from the menu.
Building Information Modelling, commonly known as BIM, has taken off over the past few years as more building designers and construction project managers have come to recognise its benefits.
Construction sites are a dangerous place to work. There are always hazards that arise and continually change throughout the construction process. The fact is that safety management is the responsibility of everyone on the site, however, there are many sites that don’t have an adequate Work Health & Safety (WHS) plan in place when something does go wrong.
As competition intensifies and profit margins come under pressure, construction firms are continuously looking for ways to enhance project productivity and avoid cost and schedule overruns. Numerous approaches have been tried, including technical improvements in construction processes, new building materials and the use of technology to streamline project management.
